Flat screen television sets like LCD and plasma TVs have become quite popular these days. If you are among the people who have purchased a flat screen television set, it is essential to purchase an LCD TV bracket to mount it at an appropriate location. When you start looking for your LCD or plasma TV bracket, make sure that you purchase one that will blend well with your TV set as well as with the décor of your room.

There are a few questions that you need to ask before purchasing a TV bracket. Do you primarily use your television set for gaming? Do you use the television set for family viewing? Do you use your LCD or plasma TV in a home theatre setup? Many different types of TV brackets are available in the market and so deciding upon the appropriate one can be quite tricky. Swivelling TV brackets, tilting TV brackets and wall mount TV brackets are few of the available TV brackets.

One of the most important advantages of these TV brackets is that they come in many different sizes, shapes, designs and load bearing capacities which enable you to mount any size and shape of television set on them. As most TV brackets are mounted on the wall, they help to save plenty of floor space which can be easily used for another purpose. TV brackets keep your television set safe and also help to provide an ultimate viewing experience.

According to Deni, her son spends a lot of his time playing video games and editing videos. Various blogs on the internet are all a-twitter with different opinions of the techno teen treat but the overwhelming opinion is that the purchase was surely over the top and a ridiculous investment. One can dare say with an air of true common sense that if Deni’s son wasn’t offered the big TV and all the equipment that goes with it, then he wouldn’t be spending so much time using it.

Looking at the pictures, most people over the age of 21 would automatically balk at the idea of having the flat screen mounted to the ceiling for fear of being forced to lie down to play video games and watch TV. Hopefully the reinforced ceiling mounts also came with a discount at the local chiropractor’s office.

Though the TV is mounted straight over the twin bed in the room, Deni has been quoted as saying that “He (her son) and his friends can prop themselves up just about anywhere and get a good view.” (Electronichouse.com, 2009 Home of the Year Awards)

Having been to many open houses in newer communities, I have blurted out the occasional “ooh and aah” over some ‘over the top’ household techno gadgets myself – so I do not condemn those who are in awe of the big screen over the bed. I am, however, in the apparent majority who is wondering if Deni actually believes that a big screen TV over her son’s bed is the best way to cultivate intellectual pursuits, exercise, healthy living and maturity for her son.

In a world that fairly begs us to babysit our kids with PSP, Xbox, iPod and the like, it is no wonder that such an extravagant screen finally made its way above the bed of a child. With DVD players mounted in vehicles, satellite TV and radio available via mp3’s and Wifi available in nearly every restaurant, there is no doubt a band of adults have successfully been marketing the theory that technology itself will somehow make kids smarter, better and more able to support themselves in the future.

What we don’t hear as much about anymore is the library, board games, taking walks, hiking, playing frisbee, going fishing, reading a book, writing a letter…pursuits that challenge the mind and create family cohesiveness.  These are the activities that will actually garner smarter, better kids for the future.

Will the Deni family all pile into their son’s twin bed to watch a family friendly movie together? Or tune into a church service Sunday morning as they huddle in their PJ’s on the bed? Highly doubtful.

What we give our children, what we share with them, how we treat them and how we spend time with them will come back to haunt us or comfort us when we’re older. We must remember what it says in Proverbs 22:6. “Train up a child in the way he shall go and when he is old he will not turn from it.” (This encompasses the good and the bad we train our children !)

1.First you need to buy a wall mounting kit that meets the size requirements of your TV.( In my case it was a 32 inch TV). Most kits are universal to the TV size no matter the brand of your TV….Buy your kit.( I got mine at Target).

2. Decide where you want to put your TV. Remove all the instructions and hardware from your kit. And gather all your tool. Take your stud finder and find a stud in the wall that you can place your mount on. ( You need a stud because it will be able to hold the weight of your TV). Your going to eventually put lag bolts into these stud. You should mark the studs with a pencil.

3. Hold your mounting bracket so that the bolt holes line up with your stud. Decide how high or low you want the TV. Use your level horizontally and vertically to see if your TV will be level. Make sure you are level. Believe me you will notice if you’re not.

4. Time to put the lag bolts in. Try to get someone to help you hold the mount while you put the bolts in the wall. You need to grab your ratchet and socket. (socket size depends on the size of your bolts, mine was 1/2″)

5. Once you tighten the bolts the whole way its time for the TV. There will be brackets to put on your TV. Normally a flat head screw driver will do. Put the brackets on and have the person that was helping you help you with the TV.

6. Attach the brackets on the back of the TV (that you just put on) to the wall mount. Lock the TV to the mount (Usually just pushing a metal bracket up, should be very easy, check your manual for sure.)

7. Connect your wires and watch your new wall mounted TV.

Additionalk cables will be required with most plasma televisions. The electric cord to plug into the wall will never go away and every video device, VCD, DVD player, video game system and sound system will need to be connected to the television. A lot of the cables may be fished into the wall hidden behind the plasma tv, however they will still be seen underneath the tv unless covered by a foilege or some other object.

A lot of these devices come with wireless ports, however to replace all of them could run into some dollars and be hard to set up. Your plasma tv wall mount can be a neat and clean installation if it is recessed allowing you to hide all of the cables and wiring.

Making Sure Mount Is Right For The Television

It’s always better to purchase the wall mount accessory from the manufacturer to insure compatablilty. Its always best to get the mount from the manufacturer of your set although there are many third party vendor mounts that should work alright.

The mounting brackets for plasma and lcd televisions must be placed so they can be fastened directly to the studs to elimate the chance of coming loose. Your plasma tv must be secured tightly onto the wall, if the mounting hardware is not sufficient to hold a firm grip to the stud walls your tv rip lose and fall to the floor.

Most plasma tv mounts can be adjusted in or out, up or down so the your can properly align your viewing angle.

Why do you keep having your kids get up from their chair to adjust the flat panel TV for you? Use this motorized mount (fits 23-inch to 40-inch flat panels) and free your beloved children up for better things – like getting you a beer from the fridge. The mount includes a remote control and will even keep you from drunkenly steering the TV too far to the left or right and hitting the wall. Supports up to 66 pounds of flat panel TV.

Black TV Mount

You know the situation. You’re lying on the bed or lazing on the couch and annoyingly you’re in just the wrong position to watch the TV properly. Well, don’t give up and move to suit the telly – flick a button and have it swivel to where you can see it better.

“The OmniMount Power40 is a state-of-the-art, remote controlled, motorised mount for a LCD or plasma screen that allows you to tilt, pan and swivel the flat panel from the comfort of your sofa,” says our favourite press release this year.

“With the touch of one button the Power40 – part of OmniMount’s award-winning MotionPicture Series – delivers maximum viewing flexibility from anywhere in the room.”

OmniMount says it uses a “virtually silent” 40dB motor to shift position and the cantilever mount fits most flat panels.

It’ll handle screen sizes from 23-inches to 40-inches and weights of up to five stone or 30kg.

The Power40 sits 2.7-inches from the wall when in the fixed position, tilts from zero to 15 degrees to reduce glare, and pans from zero to 20 degrees left and right to accommodate almost any viewing position.

It even features a safety mechanism that can detect the wall and stop any motion when movement is obstructed.

It costs £299.99 and is available now.

tv stand furniture

As the popularity of flat panel monitors and LCD flat screen televisions rises, the prices for these electronics go down and home media centers are popping up all over San Diego. The furniture that people have used for decades normally is not flattering or even usable with the new TVs and people usually will have to not only buy the new electronics, but will have to go out in San Diego to buy a new home media center, too.

Instead of hiding television sets, people are even mounting them in plain view onto their walls. Some of the most popular styles of home media centers that you can find in San Francisco include wall units that take up entire walls with cupboards and shelves, armoires which still hide the TVs with doors that close, TV lift cabinets, centers that fit in the corners of a room, and your good old inexpensive but functional basic TV stands.

Looking for a perfect TV stand that matches your home decor and also matches your budget? There are countless styles, materials, and designs that match any price range.

Don’t feel like local department stores such as Wal-Mart, RC Willey, and Best Buy are the only places that have the furniture you are looking for. For something that will fit you price range, try looking online at places like Overstock.com that sell wholesale.

My most recent purchase from a local newspaper classifieds site was not really a purchase at all. Local newspaper listing are great because you can go look at what you’re buying before you buy it just like at any department store. High quality TV stands are usually made of more expensive materials such as metal of high-quality wood. Cheaper TV stands are usually made with laminates. Preferably, check local newspaper classified listings, then ebay/craiglist. If that’s not working out, go to a wholesaler like Costco, Sams Club before heading to your local department store.

There are several practical benefits to wall-mounting a flatpanel TV, such as freeing up floor or table space, but for many the main benefit is purely aesthetic – because let’s face it, a wall-mounted TV looks pretty darn stylish. And the beauty of wall mounting is that anyone with even the most basic DIY knowledge can do it – and we’re here to show you how…

Part 1: Buying a bracket

The first step is to find the right bracket for your TV. There’s a huge number to choose from, catering for TVs of all shapes, sizes and weights, so make sure you’re armed with your set’s vital statistics before setting off to the store. And before buying, consider what sort of flexibility you need once the TV is installed, as different types of wall bracket offer different levels of movement.

Fixed brackets hold the TV flush to the wall, and don’t allow you to change the horizontal or vertical angle. Their lack of complexity often makes them the most economical option, but it can be awkward to access rear-mounted sockets.

Tilt brackets, meanwhile, allow you to tilt the screen up or down to change the vertical viewing angle, while ’tilt & swivel’ brackets let you tip the screen forward and turn it from side to side.

Small screen LCD TVs can also be mounted using brackets with more elaborate mechanisms for extra flexibility, making them perfect for kitchen or bedroom installations. You can buy brackets with an arm that pans from side to side, or ones that tilt, swivel, pan and extend. These allow you to position the screen at any conceivable angle and then tuck it away neatly when you’re done.

The next step in the buying process is to find a bracket that matches the screw holes on the back of your TV. The measurements of these differ from set to set, but those helpful folks at the Video Electronic Standards Association (VESA) came up with a set of standard measurements for TVs and brackets, making it easy to match them up.

For small screen TVs, the hole spacing is either 75 x 75mm or 100 x 100mm, and for larger screens you’ll find measurements of 100 x 200mm, 200 x 200mm or 400 x 600mm.

Also look out for the ‘CE’ or ‘GS / TUV’ badges that demonstrate that the bracket has been through the relevant testing procedures.

Part 2: Installing the bracket

The key to a successful installation is planning. First, figure out the best place for your TV to go, and if you’re not sure, try putting up a picture in the space for a couple of days and see if it feels right.

But remember that your screen should be mounted at the appropriate distance from the viewing position and at the correct height. The distance between the TV and seating position should be around 1.5 times the diagonal width of the screen, while the centre of the TV should ideally be at eye level to eliminate viewing angle problems. Avoid putting it too high to watch comfortably from a seated position.

The type of wall may also influence the position of the screen. Mounting into brickwork is straightforward as it can go anywhere on the wall and you only need suitable wall plugs and screws for the job. But mounting into plasterboard is more problematic, as you need to locate the stud wall behind and fix the bracket to it – you can’t mount the screen anywhere you like. Using inappropriate fixings and slap-dash measures can lead to serious injury, not to mention serious damage to your precious telly.

Before embarking on the actual installation, remember that screens over 32in can be pretty darn heavy, so it’s a good idea to rope in a mate to help. The actual installation process differs from bracket to bracket, but most products provide all the fixings you need in the box with detailed instructions – most brackets are designed with self installation in mind. But if you’re in any doubt about the procedure, or if your install is particularly complicated, then it might be worth paying a professional installer – preferably a CEDIA certified one.

The final step is to conceal the cables connecting your AV kit to your TV – after all, there’s no point putting your widescreen work of art on the wall only to have unsightly leads dangling down from it.

The most aesthetically satisfying solution is to run the cables in the wall behind the TV, which isn’t necessarily complex but could be tricky, as it involves cutting holes in the wall and threading all of the cables through. In-wall cabling also makes it difficult to add new kit to your system, as you’ll have to run any extra cables into the wall.

The alternative is to attach the cables to the wall and conceal them inside a molding, which can be painted to match the colour of your wall. This solution lacks the invisibility of an in-wall installation, but it is a lot less hassle.

Source

Before you tackle wall mounting a LCD or plasma, you need to ask yourself one question. Is this something best left to a professional installer? If you’re not sure then the answer is yes. I’m not implying that self installation is for everyone.

If you doubt your abilities then by all means it’s worth hiring a professional. However if your reasonably competent with minor home improvement tasks and follow my instructions carefully, this shouldn’t offer you much trouble at all.

So here is my step-by-step guide that illustrates how I install flat-panel displays. With the right preparation, just about any competent do-it your-selfer can accomplish similar installs, in as little as an hour or so.

Picking the right location:

Choosing the right place (read wall) to wall mount your LCD or Plasma in my opinion is directly proportional to the difficulty you’ll experience. Exterior walls typically offer more obstructions than interior walls, and if at all possible (especially if you’ve never done this) I recommend using interior walls.

Exterior walls, depending on the region you live in, may (or may not) be built with sway-braces which are sometimes called fire-blocks; although true fire-blocks are typically only found in commercial structures. These horizontal braces or blocks are generally found about mid ways up the wall from the floor, and greatly increase the difficulty of passing the wiring from your equipment up to the display.

Note: choosing an interior wall doesn’t 100% rule out any obstruction in the wall but I have a recommendation for checking this as well, more on that later.

Preparation:

First make sure that your chosen LCD or plasma is even capable of being wall-mounted. It’s rare but there are some early models that were table-top only. The easiest way to check this is to see if the box or owners manual mentions ‘VESA Compatible’ or just the words VESA mount. VESA stands for “Video Electronics Standards Association” and is just another way of saying this display is designed to work with VESA standard mounts.

If you don’t see any mention of this, all isn’t lost. Just look at the back of the display and check to see if it has four (or more) threaded screw inserts that a mount can be affixed to. If so, you’re good to go.

OmniMountFrom there you’ll need to select a mount that’s appropriate for your display. Wall mounts come in a wide range of sizes and styles. For brevity’s sake I’ll just mention the ones I prefer but by all means shop around for what best suits your application.

We pretty much stick with two brands of display mounts, namely OmniMount and Peerless. For LCD’s 37” and under I typically go for the OmniMount and switch-off to Peerless only when I need to mount something heavier than the average 42” Plasma. If these mounts are out of your budget, you should also check out the TV wall mounts at ArmorMount they’re highly recommended as well.

Much of this is just personal habit and not written in stone, since all these manufacturers make excellent mounts and will work just fine in a large range of applications. One last thing to consider in a wall mount is tilt. Tilt wall mounts allow you to tilt the display down slightly, this is a nice feature and one I recommend opting for if possible.

Tools Needed:

Most flat panel displays can be wall-mounted with tools you likely already own, that is if you own basic hand-tools (tape measure, screwdrivers, a socket set, cordless drill etc). One item you might not own, that can come in handy for pinpointing the exact location for the mount, is a stud finder (about $20 at Home Depot or Lowe’s).

Recommended tools: Tape Measure, Socket set, Torpedo Level, Sheetrock Saw*, Electrical Tape, Stud-Finder, Philips Screw Driver and of course the LCD/Plasma and wall mount, as well as the proper cabling.

First Steps:

You’ll need to determine the horizontal placement of the mount on your wall. Once you have a rough idea where you want to place the display (left to right) you’ll need to check for obstructions below the mount down to where your power cable and video feeds will exit the wall, and ultimately make their way to your source equipment. This is where the stud finder comes in handy.

prepAlso in the above step, locate the wall-studs as they relate in position to your bracket. At the very minimum you’ll want to ensure your penetrating into at least one wall-stud (with two anchor bolts, top & bottom) if your mounting a LCD. If you’re mounting a plasma, you’ll want to hit two studs with two anchors bolts on each side, i.e. a total of four anchors.

Note: While it is acceptable to bear the weight of a small to medium sized LCD on one stud, that doesn’t mean you can leave the opposite side loose or free. You’ll still need to toggle or anchor the opposite side, most wall-mount kits come with the necessary hardware for this.

About screen height: As you can see in the photo links at the top of the page, this particular screen is positioned somewhat high on the wall, something I try to avoid if at all possible. Our reasoning for placing this LCD high on the wall was the four poster bed in this room, any lower and the view would have been obstructed by the lower left bed post.

A quick note about the aforementioned power cable: There are several methods of getting power to your wall mounted display but not all of them are condoned by the National Electric Code. The preferred method is to employ standard ‘romex’ electrical cable terminated inside a clock-box style receptacle.

This article is geared toward do-it your-self minded individuals with at least a precursory knowledge of home electrical systems. Please use discretion and by all means consult an electrician if in doubt.

Installing the Mount:

backBefore you begin mounting the bracket to the wall, you’ll want to attach the mounting rails to the back of your display. I like to do this first so I can get a better idea of exactly where the display will sit in relation to the bracket on the wall. In other words, if the rails that affix to the rear of the display shift the overall height of the display up by two inches, you’ll need to factor this into where you mount the wall bracket.

Once this is done you’re almost ready to install the mount to the wall. Grab a pencil and make some light marks on the wall, where the anchor bolts will go through the mount and also trace out a pattern where your wall-box (for cabling) will be cut.

Then put the mount aside for a minute. You’ll want to tap or pre-start a pilot hole for your anchor bolts as they can be difficult to start on their own. You can use a cordless drill with small diameter bit for this or by driving in a sheetrock screw and then removing it.

Go ahead and cut-out and install your wall-boxes for the cabling, both at the display location and wherever you want the audio/video cables to interface with your A/V system. This is where the recommended sheetrock saw comes into play but you could probably improvise here with a box-cutter.

If you’re exiting the cables directly below the display (at electrical box height), the actual pulling of the cables will be much easier than if you’re trying to reach another location in the room, by going into the crawlspace or basement and back up into the room.

mountIf the wall your installing the display on is insulated you might find it difficult to get the cables from the wall-box behind the mount down to the box near your equipment. We use a fish-tape for these types of wire pulls, but you could probably substitute two straightened coat hangers, taped together for this as well.

Ok, with your wall-boxes in place and cabling ran you’re ready to attach the mount to the wall. Hold the mount up to the wall and with your torpedo level ensure that its level and in your desired position.

With a socket-wrench secure your first anchor; this may take a bit a pressure to get the bolt started depending on how well you tapped your pilot hole. Move onto the second bolt, third, fourth and give them all a good last twist to ensure they’re snug and you’re ready to hang the display.

As you can see in the photo above, we chose to exit our cables above the mount. We typically exit the cables in the large open rectangular area in the center of the mount, but as this particular LCD’s inputs are located toward the top-half of the display we accommodated for this with the higher cable placement.

Hanging your display:

Before you grab that display you might want to get a family member or friend to help you with this part. It’s definitely easier to hang a display with two people, one on each side than trying to wrangle it into position all by yourself, (especially if it’s a 42” Plasma, don’t try to hang something this heavy by yourself).

I also recommend taking a look at where the inputs for power and video are located on the back of the display before you lift it. It’s much easier to put the cables into their respective slots if you already know where they go.

Once the display is mounted and the cables are all in place, check to make sure the safety tabs are in position. The weight of the display itself will likely keep it secure on the mount but these tabs or “locks” that close over the rails of the mount, add the extra piece of mind you want when it comes to expensive LCD’s or Plasmas.

Final Thoughts:

FinalSo there you have it, your LCD or Plasma is wall mounted and ready to enjoy and you’ll be able to tell your friends and family ‘Yeah I installed that, it was a piece of cake’.

My goal here was to illustrate the types of things you may encounter while wall-mounting a LCD or plasma, to help you get a better idea if this is even something you want to tackle yourself.

As with any A/V project, specific applications and installation methods can give rise to unforeseen problems, but hopefully at the very least you now have a better understanding of what goes into the process.

I want to make a quick note about cabling. In my photos you’ll see that we only ran a HDMI cable. We didn’t have any component sources that were going to be used in this system, as the receiver that interfaces with this disply will handle all video switching via HDMI. In most cases however I also recommend running a set of component cables, especially if you’re in doubt as to the final system configuration.

Source